Basic typing, Inserting paper, Notes – Brother WP-700D User Manual
Page 96: The cursor keys, Setting margins, The cursor keys setting margins
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Typing
Inserting Paper
,P BREAK,
Insert a sheet of paper and press IPINSI. Paper is automatically fed. You can start
typing at approximately one inch from the top of the paper. Since the carrier is
positioned at the center after automatic insertion, press [REmwl to move the car
rier to the left margin.
NOTES:
• Paper cannot be inserted this way while in display mode (centering, right
margin flush, decimal tab mode).
• Paper can be inserted this way in UL mode only before entering text on the
screen.
The Cursor Keys
The cursor keys can be used to move the carrier (except when the text of the line
is temporarily displayed). @ and @ nnove the carrier one character pitch to the
left or the right. and ® move the carrier up or down by 1/12 of an inch (the
paper moves), except when the text is displayed on the screen.
Setting Margins
f
CODE
-------------
U)
Move the carrier by using KSPftCEBArtl or ITAW (to move to the right) or
IMCKSRACEI or [CCM№I + lEXPBl (to move to the left).
If you want to set the new margins beyond the old ones, press l(»CCl -r
when the carrier reaches the current margin.
To set a margin at the carrier position, press IC(K)EI -r iLMARI or fCODil
88