Brother WP-700D - Manual (Page 106)

Setting Tabs and Decimal Tabs
f CODE
7
J
T CODE ^ f* ’I'
-f- 8
1
, DTSET ,
Move the carrier to the desired position and press i(XXg| + jTSETI to set an ordi­
nary tab, or [CODE! + IDTSETl to set a decimal tab.
NOTES:
• Tabs and decimal tabs cannot be set in the display mode.
• The tab settings are erased when you switch the power off.
Clearing Tabs
^ CODE ^ Tl —^
9
vL-— 'L
To clear a tab, move the carrier to that position and press the ICOttEI + 2
To clear all tabs, hold down the same keys until this message appears
All tabs cleared.
Typing with Tabs
^AB
[^PtND
-Jj
To move the carrier to the next tab to the right, press . If there are no more
tabs or decimal tabs to the right, the carrier moves to the right margin. When the
carrier is on the desired tab stop, start typing. Press IWETURNI to move the carrier
back to the left margin and feed paper, or HMii to move to the next tab.
Typing with Decimal Tabs
^TAB
[_P,ND
— j
When you press iTABl to move the carrier to the next decimal tab, the dt AB indica­
tor appears. When this indicator is on, you can type a number. This will be dis­
played on the screen. When you type the decimal point, however, -all that you
have typed will be printed with the decimal point aligned at the decimal tab. You
can then enter the fractional part of the number, which is printed as you type it.
The carrier then moves to the left margin if you press , or to the next tab
or decimal tab if you press .
NOTES: _______ __________
• Pressing liaaNCELl or ictWHiefI before you type anything deactivates the deci­
mal tab function and returns you to normal typing. This is useful when you
press nwM to move to the next tab and reach a decimal tab instead.
98