Brother WP-700D User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Please read this manual carefully and keep it in a safe place for future reference. We
recommend that you write the unit’s model number and serial number in the blank space
below. These numbers can be found on the rear panel of the word processor.
MODEL NO.:
SERIAL NO.:
© 1994 by Brother Industries. All rights reserved.
Copyright Notice
Spelling Corrector licensed from Houghton Mifflin Company. Spelling U.S. PAT. Nos.
4,580,241 and 4,730,269. Copyright 1985, 1987 by Houghton Mifflin. All rights reserved.
Reproduction or disassembly of embodied programs or database prohibited. Based upon
The American Heritage Dictionary.
FCC NOTiCE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea
sonable protection against harmful interference in a residential installation. This equip
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio com
munications. However, there is no guarantee that interference will not occur in a particu
lar installation. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment has been certified to comply with FCC standards, which are applied to
the U.S.A. only. A shielded interface cable should be used according to FCC 15.27 (a).
Changes or modifications not expressly approved by Brother International Corp. could
void the user’s authority to operate the equipment.