3 multi-range functions, Toshiba – Toshiba LF600F User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
i6,F|8,A0,8,6,9,
10.3 Multi-range Functions
Multi-range functions can be set under the configuration item “RANGE TYPE.” Four types of
multi-range configurations are available as shown below:
(1) Automatic selection of unidirectional flow multi-range
(2) Automatic selection of bidirectional flows multi-range
(3) Remote selection of unidirectional flow multi-range with an external signal
(4) Remote selection of bidirectional flows multi-range with an external signal
Proceed as follows to use the multi-range functions.
Range setting
■ Set as follows referring to 0, “Span (Range),”
1.
Select “RANGE TYPE.”
2.
Set the span for ranges 1 to 4.
3.
Set the hysteretic value.
DO/DI function setting
Set DOl and/or D02 to use them as range outputs. Refer to 0, “Digital I/O”
To use multi-range selected with a remote signal, set the switch to multi-range
selected by external signal in DI.
-
120
-