17 display low cut setting, Display low cut setting function, Toshiba – Toshiba LF600F User Manual
Page 87
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TOSHIBA
6|Fj8iA0|8|6|9|
8.2.17 Display Low Cut Setting
The display low cut setting function enables you to set whether low cut treatment is to be reflected on
the display value when you set the low cut value in 0.
To set the display low cut, select either of the following items listed in the table below.
# Display low cut setting function
Selection item
Display value
ON
Low cut treatment is applied to the display value.
OFF
Low cut treatment is not applied to the display value.
For example, if the low cut value is set to 10% and the input value from the detector is 5%, the
display value will be as follows, depending on the display low cut setting:
Display low cut
Display value
ON
0.0%
OFF
5.0%
-
86
-