Toshiba – Toshiba LF600F User Manual

Page 72

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TOSHIBA

6,F,8,A0,8,6,9,

Shown below is an example of changing the custom unit from AAA/BBB to XXX/ZZZ.

Key operation

Display example

Description

B:

Select "CUSTOM UNIT" in the configuration item

MEAS MODE

MAIN DSP

SUB DSP

CUSTOM DATA

^CUSTOM UNIT

LCD ADJUST

SW POSITION

fSELl lENTl

selection screen.

STEP1

B4:

The currently set custom unit (AAA/BBB in this

CUSTOM UNIT

AAA/BBB

example) is displayed.

[ENT]

Then press the [ENT] key.

[EXT] [ENT]

* Pressing the [EXT] key returns you to the menu

screen.

STEP2

B4:

The switch name display at the bottom changes.

CUSTOM UNIT

(three keys [UP], [DOWN] and [SET])

0AA/BBB

At the same time, the cursor appears.

[ENT]

[UP] [DWN] [SET]

(The digit in the place the cursor position is

currently positioned is reverse-displayed.)

STEP3

B4:

CUSTOM UNIT

0AA/BBB

Using the [UP]/[DWN] key, change the character.

[UP]/[DWN]

When the desired character is displayed, press the

[SET]

fUPl [DWNl fSETl

[SET] key. The cursor moves to the next character.

STEP4

B4:

Repeat this operation to select all characters to the

[UP]/[DWN]

CUSTOM UNIT

xxx

/

yy

B

7th character.

[SET]

fUPl [DWN] [SET!

STEPS

B4:

Pressing the [SET] key when the cursor is

CUSTOM UNIT

positioned on the 7th character causes the selected

XXX/YYY

unit characters to be set temporarily. And a

[SET]

message to confirm whether the setting is OK is

displayed.

[NO] [SET]

If OK, press the [SET] key. If you want to redo the

setting, press the [NO] key.

STEP6-1

B4:

Pressing the [NO] key when you are asked "OK?"

CUSTOM UNIT

causes the custom unit to return to the previous

[NO]

0AA/BBB

[UP] [DWN] [SET]

state and enables you to redo the setting.

STEP6-2(=END)

B4:

Pressing the [SET] key when you are asked "OK?"

CUSTOM UNIT

causes the setting value to be determined.

XXX/YYY

Then if you press the [EXT] key, you will return to

[SET]

the menu screen.

If you press the [ENT] key, you can restart custom

fEXTl [ENTl

unit change operation from a state of XXX/YYY.

(Note 1) The selectable characters are displayed cyclically as shown below.

-------- ^ alphabetical character (lowercase)---------- ^ Alphabetical character (uppercase)

---------- Symbol ^ _____________________________ Numeric character

-

71

-

Advertising
This manual is related to the following products: