FingerTec Face ID 2 (FEM 600) Manual - Manual (Page 20)

21 CONTENTS
For 1:1, the range is from 0- and the recommended value
is 0.
For 1:N, the range is from 0- and the recommended value
is .
Menu > System icon > Face > 1:1 Threshold/1:N Threshold
> Input your value > Save
Camera Exposure/Contrast
You can adjust the light exposure level of infrared cameras
in Face ID. Improper value to the settings could affect the
performance of the camera. The recommended value is
320. Menu > System icon > Face > Exposure > Input your
value > Save
Gain
You can alter the constrast level of infrared cameras in Face
ID to get the cameras to perform at their best. The recom-
mended value is 100. Menu > System icon > Face > Gain >
Input your value > Save
Adjusting Image Quality
To determine the quality of face images captured by Face
ID cameras during enrollment and verification, you can ad-
just the quality and the recommended value is 80. Menu >
System icon > Face > Quality > Input your value > Save
Log Settings
Every time Face ID is being used, transaction logs are kept in
the memory. The settings are for Face ID to regulate house-
keeping of logs.
Log Alert
When log storage is at a certain level, user/administrator needs
to be alerted to avoid underperformance of terminal. The rec-
ommended value is . Menu > System icon > Log Settings>
Log Alert > Input your value > Save
Update Interval
Face ID needs to update transaction logs of all users in a time
interval to avoid duplication of punch period. The default in-
terval is 10 minutes. Menu > System icon > Log Settings>
Dup. Punch Period (m) > Input your value > Save
Defining Work Codes
Face ID provides work code feature which allowing user to
key in a predefined numbers after verification. The work code
numbers are predefined in TCMS V2. The following table is
showing examples of work codes.
Reasons Work code
Check In 00
Check Out 01
OT start 04
Done 0
Sick Leave 10
Half-day Leave 12
Emergency Leave 11
Meeting Client 20
Outstation 21
Workcode Mode 1: Verification followed by work code
Workcode Mode 2: Work code followed by verification