L2tpc, Key -26 l2tpc -26 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 152
4-26
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
key
Use the key command to enable a specific keyed feature. To acquire a feature key code, contact Turin
Networks Customer Support. To disable a keyed feature, see the no key command on page 4-43.
Syntax:
(config)# key
key-code
Example:
(config)# key q0B8yma2IsSL+1BarY0u
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
l2tpc
Use the l2tpc command to allow access to the VPN L2TP Connection configuration commands. See
Chapter 15, Configuration - L2TPC Mode for commands in this mode. To delete an existing connection,
see the no l2tpc command on page 4-43.
Syntax:
(config)# l2tpc {l2tpc
connection-id|address address [ipsec
local-secret
secret] [local-secret secret]}
Example:
(config)# l2tpc l2tpc 1
(config-l2tpc-1)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
key-code
Enter the key code to enable the feature.
Field
Definition
connection-id
Enter the connection ID (number).
address
Enter the IP address of the destination.
ipsec
Optional parameter. Directs IPSec to create an L2TP connection.
Requires the local-secret option.
local-secret secret
Optional parameter. Enter a secret password used to authenticate
L2TP connection. Maximum number of characters is 96.