Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 295)

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 12-25
Configuration - Multilink Interface Mode
sip-alg
Use the Multilink Interface sip-alg command to enable SIP ALG. To disable SIP ALG, see no sip-alg
command on page 12-20.
Syntax:
(config-int-mlink-{ n})# sip-alg enable
Example:
(config-int-mlink-1)# sip-alg enable
Supported Platforms: Adit 3104, Adit 3500, MSR