Remote-admin web, Router ospf, Router ospf -56 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 182
4-56
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
remote-admin web
Use the remote-admin web command to allow remote administration via Web-management. To
deny Web remote access, see no remote-admin web command on page 4-48.
CAUTION!
A
LLOWING
REMOTE
ADMINISTRATION
IS
A
SECURITY
RISK
.
Syntax:
(config)# remote-admin web {primary-port|
secondary-port|primary-secure-port|secondary-secure-port}
[port] enable
Example:
(config)# remote-admin web primary-port enable
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
router ospf
Use the router ospf command to allow access to the Router OSPF global configuration commands. See
Chapter 16, Configuration - OSPF Mode for commands in this mode. For the no counterpart of this
command, see no router ospf command on page 4-48.
Syntax:
(config)# router ospf
Example:
(config)# router ospf
(config-router-ospf)#
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
primary-port
Primary HTTP port, default port 80
secondary-port
Secondary HTTP port, default port 8080
primary-secure-
port
Primary HTTPS port, default port 443
secondary-secure-
port
Secondary HTTPS port, default port 8443
port
Enter a specific port to change from default ports listed above.