Log lcc buffer, Log lcc notify, Log -28 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 154
4-28
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
log
log lcc buffer
Use the log lcc buffer command to set the buffer size allowed for the Link Cross-Connect (LCC)
log buffer.
Syntax:
(config)# log lcc buffer
kilobytes
Example:
(config)# log lcc buffer 24
Supported Platforms:
MSR
log lcc notify
Use the log lcc notify command to set the remote Link Cross-Connect (LCC) notify level.
Syntax:
(config)# log lcc notify {error|info|ip-address
address
|none|warn}
Example:
(config)# log lcc notify warn
Supported Platforms:
MSR
Field
Definition
kilobytes
Set the size of the LCC log buffer. Range is 1 - 256 KB. Default is
16KB.
Field
Definition
error
Notify for error level.
info
Notify for information level.
ip-address address
Enter IP address of remote system to notify.
none
No notification.
warn
Notify for warning level.