Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 417)

C
HAPTER
20
Configuration - VLAN Mode
The VLAN Configuration commands allow the user to configure the global VLAN parameters.
This sub-group is entered with the (config)# vlan command from the Configuration mode.
The global VLAN commands are represented by the (config-vlan)# prompt.
VLAN (Global) Commands
• do
• end
• exit
• history
• no commands
• port-dot1q
• port-priority
• port-protocol-filter
• pvid
• tag-all
• vlan-feature