No commands, No access, No access-control – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 162: No commands -36
4-36
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Global Configuration Mode
Global Configuration Commands
no commands
no access
Use the access command to disable remote access via LAN or WAN. To enable remote access, see
access command on page 4-4.
Syntax:
(config)# no access {lan|wan}
Example:
(config)# no access lan
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no access-control
Use the no access-control command to remove an access rule for the system. To add an access rule,
see access-control command on page 4-4.
Syntax:
(config)# no access-control
name
Example:
(config)# no access-control AccessControl1
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
lan
Disable access to the unit via the LAN.
wan
Disable access to the unit via the WAN.
Field
Definition
name
Enter a current Access Control (Scheduler Rule).