Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 242)

10-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Dial Peer VoIP Mode
prefix
Use the Dial Peer prefix command to define the prefix of the phone number. To delete a prefix, see no
prefix command on page 10-5.
Syntax:
(config-dpeer-voip)# prefix prefix
Example:
(config-dpeer-voip)# prefix 1303
Supported Platforms: Adit 3104, Adit 3500, MSR
session-target
Use the Dial Peer session-target command to configure the session target. To delete a target, see no
session-target command on page 10-5.
Syntax:
(config-dpeer-voip)# session-target {hostname hostname|
ip-address address|local fxs-number|proxy}
Example:
(config-dpeer-voip)# session-target ip-address 192.168.1.100
Supported Platforms: Adit 3104, Adit 3500, MSR
Field Definition
prefix Prefix is the digits or a name to be added to the phone number after the
stripping process has been applied. Up to 10 digits may be entered.
Field Definition
hostname Indicates that the domain name server will be used to resolve the name
of the IP address.
address Enter the IP address of the dial peer.
fxs-number Enter an FXS port.
Adit 3104: Range = 1 - 24.
Adit 3500: Range = 1 - 4.
MSR: Range = 1 - 48.
proxy Set the session target to be routed through the proxy.