Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none - Manual (Page 343)

C
HAPTER
15
Configuration - L2TPC Mode
The L2TPC Configuration commands allow the user to configure the VPN Layer 2 Tunneling Protocol
Connection (L2TPC) parameters.
Enter this sub-group with the (config)# l2tpc command from the Configuration mode.
The VPN L2TPC commands are represented by the (config-l2tpc-1)# prompt.
L2TPC Commands
• do • ip primary-dns
• end • ip rip
• exit • ip route
• firewall • ip route-mode
• history • ip secondary-dns
• host-ip • local-secret
• ip address • metric
• ip default-route • no commands
• ip mtu • ppp authentication
• ip ospf authentication • ppp encryption
• ip ospf authentication-key • ppp exec-timeout
• ip ospf cost • ppp on-demand
• ip ospf dead-interval • ppp password
• ip ospf disable • ppp restart-timer
• ip ospf hello-interval • ppp time-btwn-reconnect
• ip ospf message-digest-key • ppp username
• ip ospf priority • schedule-availability
• ip ospf retransmit-interval • shutdown
• ip ospf transmit-delay • sip-alg