Shutdown, Start-address, Shutdown -7 start-address -7 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 409
Advertising
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
18-7
Configuration - PPTPS Mode
shutdown
Use the PPTP Server shutdown
command to set the admin state of the server down (out-of-service).
To
set the admin state up (in-service), see no shutdown command on page 18-6.
Syntax:
(config-pptps)# shutdown
Example:
(config-pptps)# shutdown
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
start-address
Use the PPTP Server start-address
command to set the PPTP remote host IP address range start.
Syntax:
(config-pptps)# start-address start-address
Example:
(config-pptps)# start-address 192.168.1.1
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field
Definition
start-ip-address
Enter the start IP address of the range.
Advertising