History, Ip route metric, History -7 ip route metric -7 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 327
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
14-7
Configuration - IPSec Mode
history
Use the history command to display commands that have been entered in this session. This command
can be entered in any configuration mode.
Syntax:
(config-ipsec {n})# history
Example:
(config-ipsec-1)# history
dpd
dpd-timeout 900
history
ip rip r
ip rip receive-version 1or2
ip rip enable
reconnect
ipsec-conn enable
history
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
ip route metric
Use the IPSec mode ip route metric command to define a number for the device metric.
Syntax:
(config-ipsec {n})# ip route metric
metric
Example:
(config-ipsec-1)# ip route metric 25
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
metric
Enter a number for the device metric. Range is 0-255, with a default of
10.