No ipsec log ipsec, No ipsec replay – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 167
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
4-41
Global Configuration Mode
Global Configuration Commands
no ipsec log ipsec
Use the no ipsec log ipsec command to disable IPSec related logs. To enable IPSec logging, see ipsec
log ipsec command on page 4-23
Syntax:
(config)# no ipsec log ipsec {atc|emvc|etc|ip-ctc|irtmc|mirl
|rc|rtmc|satmc|tc|tsmc|ttc|usc|vrp}
Example:
(config)# no ipsec log ipsec tc
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
no ipsec replay
Use the no ipsec authentication-retries command to disable anti-replay protection. To enable the anti-
replay protection, see the ipsec replay command on page 4-24.
Syntax:
(config)# no ipsec replay
Example:
(config)# no ipsec replay
Supported Platforms:
Adit 3104, Adit 3200, Adit 3500, MSR
Field
Definition
atc
Authentication Transforms Code.
emvc
Even More Verbose Output.
etc
Encryption Transforms Code.
ip-ctc
IP Compression Transforms Code.
irtmc
Internal Route Table Manipulation Code.
mirl
Print all IPSec Messages Ignoring Rate Limit.
rc
Receive Code.
rtmc
Radij Tree Manipulation Code.
satmc
Secure Association Table Manipulation Code.
tc
Tunneling Code.
tsmc
Transform Selection and Manipulation Code.
ttc
Tunneling Transmit Code.
usc
User-Space Communication Code.
vrp
Verbose Rejected Packets.