Description, Digit-map, Description -3 digit-map -3 – Carrier Access Adit 3000 Series and Multi-Service Router (MSR) Card none User Manual
Page 447
Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
24-3
Configuration - Voice Port Trunk Mode
description
Use the Voice Port Trunk description command to change the description of the trunk.
Syntax:
(config-vport-trk-{
n})# description text
Example:
(config-vport-trk-1)# description VoiceP-#4
Supported Platforms:
Adit 3500, MSR
digit-map
Use the Voice Port Trunk digit-map command to configure the Digit Map on the trunk level. To disable
digit map, see no digit-map command on page 24-9.
Syntax:
(config-vport-trk-{
n})# digit-map mode {default|custom}
Example:
(config-vport-trk-1)# digit-map mode default
Supported Platforms:
Adit 3500, MSR
Field
Definition
text
Enter a description for the trunk, with a maximum of 64 characters.
Field
Definition
default
Pass dialed number as a complete number for routing to the phone
book, or to the proxy if there are no phone book entries.
custom
Process as for the default digit map.