SINGER 2001 TouchTronic User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

STEP 8 TO THREAD THE NEEDLE t

A. Lower the presser foot. Grasp needle

threader grip between thumb and
forefinger of left hand.

B. Pull needle threader down as far as it

will go.

\ I /

A

I

/

C. Touchy the symbols for straight

stitch i and pattern repeat © .

• Press down slowly on the speed

controller with foot until the needle
stops. This will automatically posi­
tion the threader in line with the nee­
dle eye.

E. Squeeze needle threader grip with

thumb and forefinger of left hand.
Guide needle threader to the left, then

raise it all the way up into the machine.

passes through the needle eye. Do not
attempt to pull it through the needle eye
with your fingers.

F. Remove tail of thread from needle

threader.
• Raise presser foot. Position thread

under the presser foot diagonally to
the left. Touch j or desired stitch
symbol to clear © .

tThe needle threader can not be

used with winged or twin-needles

2 2

Note: If thread breaks while sewing, thread needle manually drawing 4 inches

(10cm) of thread down towards needle, lower foot and thread needle front to back.

Advertising
This manual is related to the following products: