Stitch balance – SINGER 2001 TouchTronic User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STITCH BALANCE
BALANCE
To change the appearance of a Flexi-Stitch
pattern, adjust the stitch balance on the
Digital Fine Tuning section of your machine.
Flexi-Stitch patterns are illustrated on page
28. To practice sewing using stitch balance,
follow the procedure below using two layers
of scrap fabric.
Note: Balance will only operate for patterns in
which balance is needed.
Touch desired pattern. This must always be
done first.
Touch-------- Digital Fine Tuning — the four
black dashes located in the center of your
stitch selection panel.
Touch if you wish to close up the pat
tern. Digits will appear in red, beginning with
the programmed balance 5, and will continue
to decrease to minimum balance 0. The ap
pearance of each digit will be accompanied
by a beep.
M/
M
BALANCE
Touch um if you wish to open up the pat
tern. Digits will appear in red, beginning with
the programmed balance 5, and will continue
to increase to maximum balance 9. The ap
pearance of each digit will be accompanied
by a beep.
\l/
BALANCE
When desired digit or balance is activated,
remove finger from appropriate arrow.
Beeping sound will continue when finger is
left on digits 0 or 9.
30