Raising the bobbin thread – SINGER 2001 TouchTronic User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Raising the Bobbin Thread
Hold needle thread lightly with left hand and
turn hand wheel slowly toward you until the
needle enters plate.
Continue turning hand wheel and holding
needle thread until needle rises. Tighten your
hold on the needle thread and bring up bobbin
thread in a loop.
Open the loop with your fingers. Draw approx
imately 4 inches (10cm) of both threads
under the presser foot and place them
diagonally to left.
27
Advertising
This manual is related to the following products: