Removing chainstitching from fabric, Removing the chainstitch accessories – SINGER 2001 TouchTronic User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing Chainstitching from Fabric
Chainstitching can be removed smoothly and
cleanly in seconds by freeing the last stitch
formed in the fabric.
1. Simply cut the last loop formed on the un
derside of the fabric.
2. Pick up the free thread end from the top of
the fabric.
3. Pull the free thread end, removing entire
line of stitching.
Removing the Chainstitch Accessories
• Raise take-up lever to highest position and
raise presser foot.
• Open slide plate and remove the chainstitch
needle plate.
• Move bobbin latch to left and lift out the bob
bin case insert by pushing down post and
lifting insert out on an angle.
• Replace general purpose or straight stitch
needle plate and bobbin (see pages 9 and
25). Close slide plate.
•
• Unthread chainstitch thread guide and
rethread for regular sewing.
Removing the Stitching
Post
Removing Chainstitch Plate
49