Stitch width – SINGER 2001 TouchTronic User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STITCH WIDTH
To practice sewing using stitch width, follow
the procedure below using two layers of scrap
fabric.
Touch desired pattern. This must always be
done first.
Touch --------Digital Fine Tuning—the four
black dashes located in the center of your
stitch selection panel.
Touch tl- if a decrease in stitch width is
desired. Digits will appear in red, beginning
with the programmed (maximum) stitch width
9, and will continue to decrease to minimum
stitch width 0.
\1/
WIDTH
If an increase in width is desired after
decreasing it, touch
'WVWV
Ai/
WIDTH
When desired digit or width is activated,
remove finger from appropriate arrow.
Beeping sound will continue when finger is
left on digits 0 or 9.
WIDTH
31