Chapter 3. electronic sewing, Selecting a stitch, Digital fine tuning – SINGER 2001 TouchTronic User Manual
Page 34: Chapter, Electronic sewing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 3. Electronic Sewing
Flexi-Stitch
Patterns t
selecting a stitch
Your sewing machine will produce most of your stitching requirements at a preprogrammed
stitch width and stitch length.
Turn machine on. You will note a movement of needle each time power switch is turned on and a
beep will be heard to indicate machine is ready to sew.
Select a pattern. All stitch patterns are orange on the stitch selection panel of your machine.
Touch symbol of pattern you wish to sew. When stitch has been selected, a beep will be heard
and a red light will be seen over the selected stitch symbol.
DIGITAL FINE TUNING
To accomodate different fabric charac
teristics or satisfy a desired effect, you can
change programmed settings by activating
Digital Fine Tuning section on machine.
To turn on the Digital Fine Tuning:
1. Touch desired pattern on stitch selection
panel. This must always be done first.
2. Touch --------- the four black dashes lo
cated in center of your stitch selection
panel. The Digital Fine Tuning, located at
the top left section of the panel, will then
light up.
Adjustment of Digital Fine Tuning is described
on pages 29-31.
t
We recommend use of the SLOW speed setting when you
sew with a
Flexi-Stitch pattern.
28