Scalloping edges – SINGER 2001 TouchTronic User Manual
Page 82
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Scalloping adds interest to blouses, dresses, lingerie, and children’s clothes.
Scallops will be perfect in form and evenly spaced when you use the scallop stitch.
This stitch is formed with one straight stitch between each scallop to prevent
pucker between scallops on a seam. The decorative uses of this stitch are
numerous. Use your imagination to create new uses for this stitch.
SCALLOP STITCH
Notch
Wrong Side of Scalloped Edge
Scalloping Edges
• Stitch: scallop)
• Stitch width: programmed or to suit application
or fabric
• Stitch length: programmed or to suit application
or fabric
• General purpose needle plate
• Special purpose foot
• Place right sides of fabric together. Shaped
or bias edges should be interfaced. Stitch
scallops.
• After stitching, trim seam allowance to 1 /8-
inch (3mm) or less.
• Clip points down to flat stitch of scallops
with scissors and, if necessary to make
points lie flat, notch curves.
•
• Turn to the right side and gently push
scallops out. Press flat.
Scalloped Edge on Finished Garment
68