Mock overedge, Method 2, Overedged seam finish – SINGER 2001 TouchTronic User Manual
Page 79
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Method 2
Mock Overedge
This finish is appropriate for bulky knits, fine
tricots and fabrics that curl or fray.
Method 2
• Make a test sample.
• Baste the garment together on the seam line
and fit in the usual way.
• After making any necessary adjustments,
suggested in Method 1, place seam under
presser foot. Stitch so that the stitches on
the left side of the pattern penetrate the
basted seam line.
• Press after stitching and trim away excess
fabric to produce a narrow seam edge.
When the seam supports the garment, omit
the trimming step and press seam open in
the usual way.
Mock Overedging
Overedged Seam Finish
stitch: overedge stretch stitch |
Stitch width: programmed onlyt
Stitch iength: programmed
Stitch baiance: programmed or to suit application
or fabric
General purpose needle plate
Overedge foot
* •
Trim seam edges evenly.
• Place stitching over the trimmed edge of the
seam allowance as illustrated.
tif a narrower stitch width is desired, as for overedging
fine fabrics, use the general purpose foot in place of the
overedge foot to prevent needle breakage.
Overedged Seam Finish
65