SINGER 14SH654 Finishing Touch (LED) - Manual (Page 48)

Width adjustment knob
A Caution:
|\ Before making adjustments, be sure to turn off
power switch
Opening the looper cover will make adjustment
easier.
Placement of upper knife in nonworking position
will make adjustment easier.(see page 53)
Push the upper knife to the right and while maintain
the knife in this position,turn the knob away to adjuste
the desired seam width,using the graduations on the
throat plate as a guideline.
A
Caution:
Always close looper cover before operating
machine.
15. HOWTO ADJUST THE PRESSER
FOOT PRESSURE_______________
• The presser foot pressure of this machine is
preadjusted at the factory to suit the sewing of
medium weight fabrics.
• Most of the materials do not require adjustment of
presser feot pressure however, there are some
instances where adjustment is necessary when
sewing lightweight and heavyweight fabrics.
• In such case, insert screwdriver through access hole
(A) in top cover and into slot (B) in pressure
regulating screw and turn regulating screw as
required.
Note: Turn regulating screw counterclockwise until
it stops against the top cover. Then turn
screw clockwise 6 turns which will be the
standard presser bar pressure.
• For lightweight fabric... Decrease the pressure
• For heavyweight fabric... Increase the pressure
4.5
3.5/outlet
(Ala sortie de
l'usine)
3.0mm
4.5
3,5/Dobladlllo
enrollado (cuando
se envía desde fábrica)
3.0mm
^ 4.5
3.5/Rolled hem
(When shipped
from factory)
3.0mm
Push
7
47