Chaining off and test sewing – SINGER 14SH654 Finishing Touch (LED) User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
20. CHAINING OFF AND TEST
SEWING
• When the machine is compietely threaded, bring aii
of the threads over the throat plate and siightly to
the left under the presser foot.
• Hold the threads and apply a slight tension.
• Turn the hand wheel toward you 2 or 3 complete
turns to start the thread chain.
• Lower presser foot.
Continue holding the chain and press on the foot
controller until the chain Is 5 ~ 7.5cm (2 ~ 3 inches)
in length.
Place fabric under the front of the presser foot and
sew a test sample.
Note: Do not pull on the fabric while sewing as this
may deflect the needle, causing it to break.
59
Advertising
This manual is related to the following products: