To replace the cloth plate, Í18. free arm sewing [ (tubular work) – SINGER 14SH654 Finishing Touch (LED) User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Í18. FREE ARM SEWING
[ (TUBULAR WORK)
_________
)
This machine become a free arm machine simply
by removing the cloth plate.
To remove the cloth plate
Slide cloth plate to the left and remove from machine
while pressing button (A) located on the underside.
This is especially suited for sewing hard to reach
garment areas such as armholes and overcasting
trouser cuffs.
Place garment over the free arm and sew.
To replace the cloth plate
Align projection on doth piate with groove in cylinder
cover and slide to the right until tab on cloth plate
(front) snaps into slot in cylinder cover.
55
Advertising
This manual is related to the following products: