KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 43)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 43 of 77
8.3 Routing '1 in 4 out' / Setup 'Example 1'
8.3.1 Block Diagram, 'Example 1'
8.3.2 Setup 'Example 1', T5 / T9 with B10 on 2 Channels
Routing '1 in 4 out'
The tops ACCESS T5 / T9 should not be flown without using the subwoofer ACCESS B5. We,
therefore, recommend that when the ACCESS T5 / T9 is combined with the ACCESS B10
without ACCESS B5, the top must always be placed on the ACCESS B10.
If the ACCESS T5 or T9 is used with EP-5 connectors, we recommend making and using an
adapter cable from Speakon to EP-5.
The current versions of the subwoofer ACCESS B5 and ACCESS B10 have a Speakon connector
that is assigned to 1+/1- for both chassis. For these versions, you do not need the following
adapter! If you want to connect a 1+/1- assigned ACCESS bass, then connect the ACCESS
subwoofer like other 1+/1- assigned K&F subwoofers (see relevant examples).