KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 55)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 55 of 77
8.11.2 Setup 'Example 9', T5 / T9 with B5 and additional Bass B10
ACCESS setups with additional B10 for a separate deep bass playback of selected signals.
The main out of the mixing console delivers the sum of the signals for the top speakers T5 /
T9 as well as for the B5. Selected signals with a high share of deep bass, like bass drum,
keyboard, etc. are picked up at the mixing console’s AUX path and transmitted to the B10
using a separate controller path.
If the ACCESS T5 or T9 is used with EP-5 connectors, we recommend making and using an
adapter cable from Speakon to EP-5.
The current versions of the subwoofer ACCESS B5 and ACCESS B10 have a Speakon
connector that is assigned to 1+/1- for both chassis. For these versions, you do not need the
following adapter! If you want to connect a 1+/1- assigned ACCESS bass, then connect the
ACCESS subwoofer like other 1+/1- assigned K&F subwoofers.
ACCESS B10 with EP -5 connector:
In this example, the B10 is only connected to one channel of the CD 44! A connector is used,
though, that supplies 2 channels. When connecting the B10, use a two-core cable with the
assignment 1+ and 1-. You should use one of the following adapters at the speaker input of
the B10 in order to transmit the signal to both chassis.