KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 62)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 62 of 77
8.16.1 Block Diagram 'Example 14'
8.16.2 Setup 'Example 14'
When connecting the Sequenza 10 N / W Systems directly to connector 2 (and / or 4) of the
CD 44 without Connector Panel CP 4, then LS-Blocks on channels 1 and 2 (and/or 3 and 4)
have to be swapped. Apparent when you compare setup Example 13 with setup Example14.
The same applies to Nomos XLC. When connecting the Nomos XLC Systems directly to
connector 2 (and/or 4) of the CD 44 without Connector Panel CP 4, then LS-Blocks on
channels 1 and 2 (and/or 3 and 4) have to be swapped.