Avery Dennison 6035 Equipment Manual - Manual (Page 13)

To charge the battery handle with the fast charger:
1. Turn the printer off.
2. Remove the battery handle (see "Changing the Battery
Handle").
3. Plug the round connector of the charger into the socket on the
battery handle.
4. Plug one end of the power cable into the charger and the
other end into a grounded (three prong) electrical outlet of the
correct voltage.
Refer to the instructions that come with the charger for more
information.
Charger
Battery Handle
Connector
2-4 Getting Started TC6035EZEM Rev. C 10/98