Avery Dennison 6035 Equipment Manual - Manual (Page 65)

To check the printing, scroll until you highlight printing on the
Hardware Test menu. Press e
. You will see:
Select item
Test Pattern
Print Speed
Gray Scale
D
To print the test pattern:
1. Load supplies in non-peel mode.
2. From the Printing sub-menu, scroll with the arrow keys until
you highlight Test Pattern. Press e . You will see:
Ready to print
3. Press e to print the test sample shown below. Press b
to exit.
If your printed test sample has fewer lines or no lines, keep
the test sample and call Service.
7-10 Using Diagnostics TC6035EZEM Rev. C 10/98