Avery Dennison 6035 Equipment Manual - Manual (Page 51)

To clean the platen roller:
1. Turn the printer off and open the supply cover.
2. Remove your supply. See "Removing Supplies" in Chapter 3.
3. Open the label deflector by gently pressing down with two
fingers.
4. Clean the platen roller and remove any adhesive buildup.
5. Turn the platen roller with your finger, and then continue
cleaning.
6. Reload your supply and close the label deflector and supply
cover.
Platen Roller
6-6 Care and Maintenance TC6035EZEM Rev. C 10/98