Avery Dennison 6035 Equipment Manual - Manual (Page 57)

To access these options, you need to use the Diagnostic program.
To start the Diagnostic program:
1. 4-line/33 Key Printer Only. From the DOS prompt, press
s(if not already in Shift mode).
2. Type DIAG and press e . You will see:
DOS Ultra Diagnostic
Display
Keyboard
Serial Port
D
The currently selected diagnostic function is displayed in
inverse mode. An arrow to the right of the display means that
there are more functions.
3. 4-line/33 Key Printer Only. Press s to return to normal
mode.
4. Scroll with the arrow keys until you highlight the diagnostic
function you want to use. Press e .
Use the right o r down arrow keys to scroll down the list of
functions. Use the left or up arrow keys to scroll up the list.
To exit any diagnostic function, press b or
scroll to Exit in the menu and press e.
7-2 Using Diagnostics TC6035EZEM Rev. C 10/98