Avery Dennison 6035 Equipment Manual - Manual (Page 59)

C h e c k i n g K e y b o a r d C o n n e c t i o n s
The Keyboard diagnostic function displays a keypad replica to test
keyboard connections.
To check keyboard connections:
1. At the Main menu, scroll with the arrow keys until you
highlight Keyboard. Press e . You will see a replica of
the printer keypad.
2. Press a key to verify the name of the key and its location on
the replica. Press b twice to exit.
Te s t i n g t h e S e r i a l P o r t
This test is typically performed by Service or your MIS
department. To check the serial port, you perform a loopback
test, which checks the port for receiving and sending data from a
host.
The loopback plug referred to in the
procedure below is part number 116850,
available as an accessory.
To test the serial port:
1. At the Main menu, scroll with the arrow keys until you
highlight Serial Port. Press e . You will see:
Insert loopback plug
into serial port
connector.
Press key to cont
7-4 Using Diagnostics TC6035EZEM Rev. C 10/98