Avery Dennison 6035 Equipment Manual - Manual (Page 38)

To switch modes temporarily, use the keys shown in this table.
Mode you are in You need Press + Hold
(4-line/33 Key
Printer)
Press
(8-line/48 Key
Printer)
Numeric/Normal Upper-case
Alpha s s or f
then s
Lower-case
Alpha h The letter as
needed
Upper-case
Alpha Lower-case
Alpha h sor f then
s
Numeric/Normal s The letter as
needed
Lower-case
Alpha Upper-case
Alpha s sor f then
s
Numeric/Normal h The letter as
needed
Ctrl and Alt also invoke codes or commands designated by the
application.
U s i n g F u n c t i o n K e y M o d e
This mode allows you to use the numeric keys (0-9) as
function keys and to enter the other characters on the upper left
corner of the keys (see the next page). On the 8-line/48 Key, you
can enter displayed symbols or numeric keys (0-9) as function
keys. The function keys are used to perform special functions.
Ask your System Administrator if you need to use these keys.
On the 4-line/33 Key in function key mode, the cursor is an
underscore and a vertical line appears on the left side of the
display.
On the 8-line/48 Key Printer, an F appears on the status line, and
the cursor is an underscore.
Basic Operations 4-11 TC6035EZEM Rev. C 10/98