Avery Dennison 6035 Equipment Manual - Manual (Page 82)

R E F E R E N C E I N F O R M A T I O N
A
C a b l e P i n o u t s
The cable pinouts on the mini-DIN connector on the printer are set
as shown.
Pin Signal
1 Send RTS
2 Receive CTS
3 Receive RX
4 Ground
5 Send TX
6 DSR
7 Send DTR
8 Send DCD
(optional +5 volt)
A-1 Reference Information TC6035EZEM Rev. C 10/98