Avery Dennison 6035 Equipment Manual - Manual (Page 25)

6. Press the supply lock down to lock the supply holder in place.
7. Remove the seal from the supply
roll.
8. Place the supply roll as shown in
the supply holder so that it feeds
labels from the bottom. The black
marks on the labels should be
facing down.
Specialty paper has no black marks.
9. Feed the supply under the applicator roller and over the label
deflector.
10. Press the trigger or a key assigned by your System
Administrator until all slack is removed. Discard extra
supplies.
11. Close the supply cover completely.
Label Deflector
Applicator Roller
3-10 Loading Supplies TC6035EZEM Rev. C 10/98