Avery Dennison 6035 Equipment Manual - Manual (Page 15)

The best bet for a quick recharge is to place a powered-on printer
on a fast charger and leave it alone for eight hours.
C h a n g i n g t h e B a t t e r y H a n d l e
To change the battery handle:
1. Important. Turn the printer off.
2. Hold the latch down while you slide the battery handle off
towards the keypad.
3. Slide a fully charged battery handle onto the printer until it
stops.
Make sure the latch clicks when you attach
the battery handle.
Latch
2-6 Getting Started TC6035EZEM Rev. C 10/98