Avery Dennison 6035 Equipment Manual - Manual (Page 19)

6. Press the supply lock down to lock the supply holder in place.
7. Remove the seal from the supply roll. Peel and discard the
first four inches of labels from the backing paper. Tear evenly
across the supply strip.
8. Place the supply roll as shown in
the supply holder so that it feeds
labels from the bottom. The black
marks on the labels should be
facing down.
9. Hold the printer upright and gently press down on the label
deflector as shown. It may be stiff.
Label Deflector
3-4 Loading Supplies TC6035EZEM Rev. C 10/98