Avery Dennison 6035 Equipment Manual - Manual (Page 63)

D i s p l a y i n g M a c h i n e To t a l s
To display machine totals:
1. From the Printer menu, scroll with the arrow keys until you
highlight Machine Totals. Press e . You will see:
Select item
Inches Printed
Tags Printed
Exit
2. Scroll with the arrow keys to select the number of inches
printed or the number of tags printed. Press e .
The number of inches or number of tags is automatically
displayed. Press e
to exit.
P e r f o r m i n g H a r d w a r e Te s t s
The hardware test sub-menu has the following selections:
Printing Prints a test pattern, performs a speed test,
prints the gray scale, or adjusts contrast.
Sensors Tests on-demand and black mark sensors.
Printhead Checks the dot resistance and temperature of
the printhead.
Battery Checks the battery charge state.
Motor Checks the functionality of the motor.
Hardware tests are typically performed by an authorized Service
representative. However, if you need to run any of these tests,
make sure you read the following sections for the acceptable
results of each test and when it is necessary to call Service.
7-8 Using Diagnostics TC6035EZEM Rev. C 10/98