Avery Dennison 6035 Equipment Manual - Manual (Page 40)

U s i n g D e l e t e M o d e
To use the Delete mode:
1. Press f. On the 4-line/33 Key Printer, the cursor is an
underscore, and a vertical line appears on the left side of the
display.
On the 8-line/48 Key Printer, the cursor is an underscore and
an F appears on the status line.
2. Press g to enter delete mode. On the 4-line/33 Key Printer,
the cursor is an underscore, and a t indicator appears on the
left side of the display.
On the 8-line/48 Key Printer, the cursor is an underscore and
an X appears on the status line.
Continue deleting by pressing g repeatedly. Return to the
original mode by pressing any other key besides g .
Use of Delete mode is dependent on the
application you are running. You cannot enter
delete mode on the DOS Command line.
U s i n g t h e A l t a n d C t r l k e y s
The a and h keys invoke codes or commands designated by
the application.
To use the a or h key:
1. Press the appropriate key(s) to enter this mode:
◆ a
◆ h
2. Press the key you need for your application.
Basic Operations 4-13 TC6035EZEM Rev. C 10/98