Avery Dennison 6035 Equipment Manual - Manual (Page 36)

U s i n g U p p e r - c a s e A l p h a M o d e
Upper-case Alpha mode works differently on the two printers.
4 - l i n e / 3 3 K e y P r i n t e r
This mode allows you to enter upper-case letters or spaces.
When you are in Upper-case Alpha mode, the cursor is an
underscore and the q indicator appears on the left side of the
display.
To use Upper-case Alpha mode:
1. When you are in Numeric/Normal mode, press s to enter
Upper-case Alpha mode.
2. Enter your data.
3. Press s to return to Numeric/Normal mode.
8 - l i n e / 4 8 K e y P r i n t e r
This mode allows you to enter upper-case letters, spaces, or
hidden symbols. In Upper-case Alpha mode, the cursor is an
underscore and the status line has the
é symbol on it, or for
caps lock.
To use Upper-case Alpha mode:
1. When you are in Numeric/Normal mode, press s to enter
Upper-case Alpha mode. Or, you can press f, then s to
set caps lock.
2. If caps lock is on, enter your data. Otherwise, press the first
character key (from step 1) and repeat steps 1 and 2 as
needed until you have entered all the data.
3. If you set caps lock, press f, then s again to turn off
caps lock.
Basic Operations 4-9 TC6035EZEM Rev. C 10/98