Adjustments, Adjustments -16 – Basler Electric DECS-100 User Manual
Page 50
4-16
DECS-100 Installation
9287500991 Rev M
Figure 4-12. Operating Power Connections for DECS-100 Programming (Input Voltage >120 Vac)
These special operating considerations are to be observed only during DECS-100 programming.
Applications where the DECS-100 is powered from the generator output (shunt powered) or a permanent
magnet generator (PMG) are still valid within the constraints given in Section 1, General Information,
Specifications. In applications where station power is used to power the DECS-100, the DECS-100
should be protected by an Inrush Current Reduction Module (ICRM-7). See Power Supply Inputs for more
information.
ADJUSTMENTS
All adjustments are made using external switching, or with BESTCOMS software via the rear panel
communication port. See Sections 5 and 6 for more information regarding setting adjustments with
BESTCOMS software.