Basler Electric DECS-100 - Manual (Page 75)

9287500991 Rev M DECS-100 BESTCOMS™ Software 5-23
Figure 5-24. Settings File Reminder Dialog Box
Clicking No allows you to exit the upload process so that a DECS-100 settings file can be created. Refer
to the Settings Files subsection for information about creating a settings file.
Clicking Yes continues with the upload process and displays the Open dialog box of Figure 5-25. The
Open dialog box is used to locate and select the appropriate file for uploading to the DECS-100. Only files
with a .S19 extension are displayed in the Open dialog box.
Figure 5-25. Open Dialog Box
6. Select the appropriate file for uploading and click the Open button to start the file transfer. A dialog
box (Figure 5-26) indicating the progress of the file transfer is displayed.
Figure 5-26. File Transfer Progress
Once the transfer is complete, the device information is displayed in the right-hand column of the DECS-
100 Embedded Program Loader (Figure 5-27). After the file transfer is complete in BESTCOMS, wait at
least five seconds before removing power. The displayed program version number indicates the version
and date of the firmware just loaded.