Beisler 1265-4 - Manual (Page 22)

Operating Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
B-12
B.2
Functions of the machine
Function switches, Fig. 12:
Clamp switch 2 for opening / closing the bonding
clamp:
During normal operation, the bonding clamp is
open. The knee lining is pushed below the bon-
ding clamp to be secured to the trousers panel.
When the clamp switch is pressed, the bonding
clamp closes, and the knee lining is secured for
the bonding process.
Bonding switch 1 for activating the bonding stamps:
The trousers panel is placed onto the knee lining.
When the bonding switch is pressed, the upper
and lower stamps of the bonding unit are pressed
against each other and the bonding mesh between
the stamps bonds the sewing pieces to each other.
Footswitch for stacker 3:
When this footswitch is pressed, the stacker bund-
le clamp opens so that the sewing pieces can be
removed. When the footswitch is released, the
bundle clamp closes again.
Footswitch for manual sewing 4:
This footswitch controls the sewing speed (12
speeds) during manual sewing. The further the pe-
dal is depressed, the more the sewing speed
increases.
If the function Manual sewing is enabled, the photocell is deactivated,
and the footswitch is activated.
NOTE - Automatic sewing process
To start automatic sewing after manual sewing, depress the
short portion of the pedal (see arrow).
Fig. 12