Beisler 1265-4 - Manual (Page 81)

D-18
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
Functions on access level 2
The function keys on access level 2 are assigned to the symbols that
are shown on the display. These symbols are only visible when access
level 2 has been selected. They are displayed inverted when the machi-
ne function that they represent has been disabled in the marked seam
of the sewing program.
BD":z!FH
abcdefgh
F1 List of basic parameters
F2 Activate / deactivate the seams of a sewing program
F3 Enable preseams
F4 Set start mode
F4 Activate machine manually
F6Activate C machine (optional) manually
F7 Reset the day counter to zero
F8 Display inputs / outputs
Basic parameters
Basic parameters are values that control the basic functions of the ma-
chine. Changes to basic parameters will affect all stored sewing pro-
grams.
NOTE - Modifications of basic parameters
The basic parameters of the machine have been fitted at
the factory to match one another perfectly. Improper modi-
fication of the values can impair the processing quality or
even damage machine components.
1. Request the basic parameter list:
B
• Press the a key.
2. To move up or down in the parameter list:
• Press the § or $ key.
3. Activate the parameter input field:
• Press the % key.